Professional Bluetooth-connected moisture removal system for smartphones and tablets. Seamless app integration for treatment management.
Learn how to connect and operate your Redux Phone & Tablet Dryer
Find solutions to common issues with your Redux Phone & Tablet Dryer
Close the Redux Bluetooth app on all tablets. Unplug the Redux unit for a full 2-minute period. Restore power. Re-open the app on one tablet and wait for the Machine ID to populate. Select it. When the blue Bluetooth light turns solid, the unit is connected and ready for treatment.
In the app, find the Machine ID listed as "Unavailable." Swipe left on it and choose Delete or Forget. Close the app. On all other tablets repeat. Then unplug the Redux unit for 2 minutes. Restore power. Open the app and wait for the Machine ID to appear, select it. The blue Bluetooth light should turn solid.
Hardware Issues
Check that the dryer is connected to a power supply labeled "CUI Inc/CUI Japan" or "Redux." Confirm the green LED on the power-brick is lit. Ensure cords are firmly connected and test plugging directly into a wall outlet (not a surge-protector). To confirm the outlet works, plug another device into it.
Remove any phone case. Place the phone face-down in the center of the chamber. Ensure nothing touches the chamber sides or the lid interior. If using a USB cable, make sure it doesn't hang over the chamber edge. Locate the rubber gasket around the chamber. Clean it if dusty or dirty and let it dry fully. Make sure it's seated evenly around the chamber. Then restart the treatment.
All support requests are addressed Monday–Friday between 8:00 AM and 5:00 PM (EST)
Our support team is ready to assist you with any questions about your Redux Phone & Tablet Dryer.
