Drying in Progress
Device is performing a dry cycle. Auto-shuts off after 20 hours. Typical cycle ~6 hours (varies by load).
Compact, portable drying solution for hearing aids and small electronics. Single-use Electronic Rice beads with easy LED status indicators.

Understanding your DryBuddy Mini's status lights
Device is performing a dry cycle. Auto-shuts off after 20 hours. Typical cycle ~6 hours (varies by load).
Green LED remains on for 4 hours once drying is finished, then both LEDs turn off. Remove your devices.
Device is powered but inactive. Slide switch OFF to fully power down and save CR1632 battery life.
Electronic Rice beads are saturated. Please recycle. Replacement Drying Pods will soon be available.
Power OFF, wait 10 seconds, then power ON. If not resolved, contact Support@redux.com
Quick solutions to common issues
Dead or missing battery
Install fresh CR1632 coin cell battery (check polarity)
Device stuck in error state
Important information about your DryBuddy Mini
Important information about your DryBuddy Mini
DryBuddy Mini uses single-use Electronic Rice beads that cannot be reactivated. When the solid red LED appears, the Electronic Rice beads are spent and the device should be recycled.
Do not open DryBuddy Mini until you are ready to use it. Opening the device prior to use voids the warranty as the beads will begin absorbing ambient moisture.
Coming Soon: Replacement Drying Pods will soon be available for purchase, allowing you to extend the life of your DryBuddy Mini. Sign up for our newsletter to be notified when they become available.
Our support team is ready to assist you with any questions about your Redux DryBuddy Mini.